setSockOpt

Description

Sets the socket option.

Syntax

socket.setSockOpt(name, value, level)

Parameters

name

Integer. Specifies the socket option for which the value is to be retrieved

value

Integer. Specifies the new option value

level

Integer. Specifies the level at which the option is defined

Level	Name	Return Type	Description
0xFFFF	0x0002	Boolean	Whether the socket is listening.
	0x0020	Boolean	Whether the socket is configured for the transmission of broadcast messages.
	0x0001	Boolean	Whether the debugging is enabled.
	0x0080	Boolean	Whether the SO_LINGER(0x0080) option is disabled.
	0x0010	Boolean	Whether the routing is disabled.
	0x1007	Integer	Retrieve error status and clear.
	0x0008	Boolean	Keep-alives are being sent
	0x0080	Integer	Returns the current linger options.
	0x0100	Boolean	Whether the out-of-band data is being received in the normal data stream.
	0x1002	Integer	Buffer size for receives.
	0x0004	Boolean	Whether the socket can be bound to an address which is already in use.
	0x1001	Integer	Buffer size for sends.
	0x1008	Integer	The type of the socket (for example, $SOCK_STREAM).
6	0x0001	Boolean	Whether the Nagle algorithm is disabled for send coalescing.

Returns

Boolean.